Ferolite NAM 30 Non Asbestos Jointing Sheet

Next > >

Get a Price/Quote

Send Inquiry

Product Code : 05

Product Description

Ferolite NAM 30 Non Asbestos Jointing Sheet is specially designed to meet with the increasing requirements of engineering and chemical industries for various purposes. It has a graphite finish and is a compressed asbestos fibre jointing and has wire gauze insertion. This sheet is manufactured in compliance with set quality norms or can be customized as per the specifications given by our valued customers. Further, Ferolite NAM 30 Non Asbestos Jointing Sheet is admired for its unique features like highly durable, robust and resistance against acids.

Applications:

Suitable for oil resistant gasket material for medium to higher loading, good resistance to water and gases, oils & fuels. A standard sealing material used in compressors, pipelines, transmission, gas meters and internal combustion engines.

Product Details:

Material Composition (Type of fibres)	Aramid Fiber, Mineral Fibre.
Binders	NBR
OPERATING CONDITION :
Max.Peak Temp	400C
Max. Continuous Temp	250C
Max.Continuous Temp.with steam	220C
Max. Operating Pressure	100 Kg/cm2

Physical properties

PROPERTIES	TEST METHOD	UNTI	SPECIFIED VALUE
DENSITY		Gm/cm	1.70-2.00
TENSILE STRENGTH
(a) ACC to ASTM F152(ACROSS GRAIN)		N/mm	< 10
(b) ACC to DIN52910 (ACROSS GRAIN)		N/mm	< 7
COMPRESSIBILITY	ASTM F36A	%	5-15
RECOVERY	ASTM F36A	%	< 50
FLUID ABSORPTION	ASTM F146
(a) INASTM OIL NO. 3
INCREASE IN MASS		%	< 10
INCREASE IN THICKNESS		%	< 10
(b) IN FUEL B	ASTM F 146
INCREASE IN MASS		%	< 10
INCREASE IN THICKNESS		%	< 10
(c) IN WATER/ANTIFREEZE	ASTM F 146
INCREASE IN MASS		%	< 10
INCREASE IN THICKNESS		%	< 7
IGNITION LOSS	DIN 52911	%	< 30
SEALABILITY AGAINST Nitrogen	DIN 3535	Cm / min	< 1.0
STRESS RESISTANCE
16h 300C	DIN 52913	N/mm	~18
16h 175C	DIN 52913	N/mm	~-

Standard Sheet Size		1500x2000 mm, 1500x4000mm, 1500x1500mm 1500x4500 mm, 1500x3000mm, 2000x3000 mm
Thickness		0.25 mm to 6.00 mm (For Non-Metallic Range) 0.80 mm to 6.00 mm (For Metallic Range)
Tolerance	Thickness	< 1mm =+0.10 mm > 1mm=+ 10%
	Length	+ 50mm
	Width	+ 50mm